This box can be used as a module in the {{chembox}}. Copy the left column into an existing chembox, before the first section, and give the section a unique number 1–9. The subtemplate calling should look like | Section1={{Chembox Identifiers | ... }}.
{{Chembox Identifiers}}
------
CAS registry number, links to http://www.commonchemistry.org/
CAS registry number comment
Other CAS RN (unformatted)
------
ChEBI, links to http://www.ebi.ac.uk/chebi/
------
CHeMBL
------
ChemSpider ID, links to http://www.chemspider.com/
ChemSpider ID comment
ChemSpider ID verified? If yes, type: {{chemspidercite}}
Other ChemSpider ID
------
DrugBank
comment
Other DrugBank
------
IUPHAR/BPS
comment
Other IUPHAR
------
KEGG entry, links to http://www.genome.jp/kegg/
------
PubChem compound ID, links to https://pubchem.ncbi.nlm.nih.gov/
PubChem compound ID comment
Other PubChem compound ID
------
SMILES
SMILES comment
Other SMILES
------
StdInChI
StdInChI comment
StdInChI Key
StdInChI Key comment
------
InChI
InChI comment
Other InChI
InChI Key
InChI Key comment
Other InChI Key
------
UNII: Unique Ingredient Identifier, by FDA
UNII comment
Other UNII
------DTXSID (CompTox; U.S. EPA)
DTXSID: CompTox Chemistry Dashboard (default: Property P3117 from Wikidata)
------
Abbreviations
Beilstein reference
Gmelin ID
UN number
MeSH heading, links to https://www.nlm.nih.gov/mesh/
Seven identifiers are bot-checked for changes (and all their 1–5 indexed values). A check marker like {{cascite}} is added to the infobox.
For example, based on |CASNo=... the bot might add:
{{Chembox Identifiers}}
------
CAS registry number, links to http://www.commonchemistry.org/
CAS registry number comment
Other CAS RN (unformatted)
------
ChEBI, links to http://www.ebi.ac.uk/chebi/
------
CHeMBL
------
ChemSpider ID, links to http://www.chemspider.com/
ChemSpider ID comment
ChemSpider ID verified? If yes, type: {{chemspidercite}}
Other ChemSpider ID
------
DrugBank
comment
Other DrugBank
------
IUPHAR/BPS
comment
Other IUPHAR
------
KEGG entry, links to http://www.genome.jp/kegg/
------
PubChem compound ID, links to https://pubchem.ncbi.nlm.nih.gov/
PubChem compound ID comment
Other PubChem compound ID
------
SMILES
SMILES comment
Other SMILES
------
StdInChI
StdInChI comment
StdInChI Key
StdInChI Key comment
------
InChI
InChI comment
Other InChI
InChI Key
InChI Key comment
Other InChI Key
------
UNII: Unique Ingredient Identifier, by FDA
UNII comment
Other UNII
------DTXSID (CompTox; U.S. EPA)
DTXSID: CompTox Chemistry Dashboard (default: Property P3117 from Wikidata)
------
Abbreviations
Beilstein reference
Gmelin ID
UN number
MeSH heading, links to https://www.nlm.nih.gov/mesh/
{{Chembox Properties}} - incomplete list
Reference
Chemical formula
reference
comment
per element (alternative input)
molecule charge
MolarMass
MolarMassRound
MolarMass_ref
MolarMass_notes
Appearance
Odor, Odour
Density
MeltingPt, any text
Number, in Celsius. Is converted to F and K
Also possible: MeltingPtF=, or MeltingPtK=
BoilingPt, any text
Number, in Celsius. Is converted to F and K
Also possible: BoilingPtF=, or BoilingPtK=
Critical temperature and pressure
SublimationConditions
Solubility in water (Aqueous solution)
SolubilityProduct
SolubilityProductAs
SolubleOther
Solvent
Solubility1
[[{{{Solvent1}}}]]
Solubility2
[[{{{Solvent2}}}]]
Solubility3
[[{{{Solvent3}}}]]
Solubility4
[[{{{Solvent4}}}]]
Solubility5
[[{{{Solvent5}}}]]
CMC
HLB
LogP
VaporPressure
HenryConstant
AtmosphericOHRateConstant
pKa
pKb
Conjugate acid
Conjugate base
IsoelectricPt
LambdaMax
Absorbance
BandGap
ElectronMobility
SpecRotation
MagSus
ThermalConductivity
RefractIndex
Viscosity
CriticalRelativeHumidity
Dipole
OrbitalHybridisation
SpecificSurfaceArea
PoreVolume
AveragePoreSize
GHS reference
GHS pictogram by name (Category:GHS templates), |GHSPictograms={{GHS01}}{{GHS07}}
GHS Signal Word ("Danger", "Warning")
GHS Hazard statements, use {{H-phrases}}
GHS Precautionary statements {{P-phrases}}
NFPA 704:
Health, blue. Health hazard code (0–4 or -)
Flammability by , red. See {{NFPA 704 diamond}} documentation
Instability (reactivity), yellow. Instability hazard code (0–4 or -). "NFPA-R=" is also allowed
Special hazards, white. Other hazard codes (like W, OX, RA, -. See list)
Reference for the NFPA fire diamond
Flash point, any text
Temperature, number in C. Can be a range: '50 to 60'. Also _PtF, _PtK. (see: temperatures)
Autoignition point, any text
Temperature, number in C. Can be a range: '50 to 60'. Also _PtF, _PtK. (see: temperatures)
Threshold Limit Value
Threshold Limit Value: Time Weighted Average
Threshold Limit Value: Short Time Exposure Limit
Threshold Limit Value Ceiling
Lethal Dose in 50% (median lethal dose) specify species and whether oral / dermal / intravenous; eg, 950mg/kg (rat, oral)
Lethal Dose Low
Lethal Concentration in 50%, or median lethal concentration
Permissible exposure limit
Recommended exposure limit
Immediately dangerous to life or health 'dose'
{{Chembox Footer}} - (Chembox internal only; parameters entered in main {{Chembox}})
Set lefthand text column width (default is 40%; see also 'width=' option in {{Chembox}})
Set '=no' will hide the standard state notice
Allows a general note in the bottom box
Set '=no' will hide the infobox reference notice
Bot maintained
Do not edit, add or remove these fields
Four or less parameters are needed to present temperature data:
|MeltingPt=Decomposes when > |MeltingPtC=50 |MeltingPt_ref=<ref>[www.example.com]</ref> |MeltingPt_notes=My notes<ref>[www.chemspider.com]</ref>
Decomposes when >_50 °C (122 °F; 323 K)[1]_My notes[2]
The options for conversion: |MeltingPtC=50 |MeltingPtF=50 |MeltingPtK=50
Temperature range: |MeltingPtC=50 to 70 |MeltingPtF=50 to 70 |MeltingPtK=50 to 70
50 °C (122 °F; 323 K)
10 °C; 50 °F; 283 K
−223.2 °C; −369.7 °F; 50.0 K
50 to 70 °C (122 to 158 °F; 323 to 343 K)
10 to 21 °C; 50 to 70 °F; 283 to 294 K
−223.2 to −203.2 °C; −369.7 to −333.7 °F; 50.0 to 70.0 K
{{Chembox Properties}} - all temperature parameters
Any text for melting point value
Temperature, number only. Can be a range: '100 to 200'
number, when in degrees Fahrenheit
number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)
Any text for boiling point value
Temperature, number only. Can be a range: '100 to 200'
number, when in degrees Fahrenheit
number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)
{{Chembox Hazards}} - all temperature parameters
Any text for Flash point value.
Temperature, number only. Can be a range: '100 to 200'
number, when in degrees Fahrenheit
number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)
Any text for autoignition temperature value
Temperature, number only. Can be a range: '100 to 200'
number, when in degrees Fahrenheit
number, when in kelvins
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)
A template like {{cascite}} is added and set by CheMoBot automatically after certain edits. Depending on the earlier data checks, the template will be marked "correct" or "changed" (i.e., to be checked). 'changed' articles are categorized for maintenance.
For example, when parameter |CASNo= is changed in the article, the bot sets |CASNo_Ref={{cascite|changed|??}} initially. See